No longer available:
Replaced by DCC25 
General Specifications for Train$ave decoders:
Size:
25.25mm x 16.6mm x 5.3mm (0.95” x 0.65” x 0.2”)
Power Train$ave
decoders have a 1.1 amp continuous motor drive, with a total power handling of
Handling:
1.6 amps (including the power used by the lighting functions). This means that they can be
used for all current OO/HO locomotives as well as older locomotives with higher power needs
Addressing:
Address is set to address 3 at the factory. They will accept any address between 1 and 9999
Harness
This has a 90mm overall length. The decoder end has a removable 9 pin plug/socket, while
the locomotive end has an 8 pin NEM652 plug. The free purple wire is for Aux2 (Function
button 2)
Train$ave recommends removal of capacitors and suppression parts from all locomotives prior to installing your decoder. This will ensure the best quality running in locomotives of all brands.
