Home > DCC and Analogue Controllers + Decoders > DCC > Model Rectifier Corp
MRC 0001651 - HO Scale Decoder with JSt Connector/Adaptor

MRC 0001651 - HO Scale Decoder with JSt Connector/Adaptor


Our Price: £22.46
Share on Facebook
Description

This economical decoder comes equipped with the JST connector as well as the standard NMRA connector for DCC.



  • Designed for HO scale

  • Built-in NMRA DCC plug and 9-pin plug

  • Maximum current: 1.5 Amp

  • Programmable for either 2-digit (1-127) or 4-digit (1-9999) addresses

  • Programmable start voltage

  • Programmable acceleration rate

  • Programmable deceleration rate

  • Programmable speed curve (factory pre-set)

  • Programmable top voltage

  • Programmable 14, 28, or 128 speed steps

  • Directional lighting at 0.1 amp rate

  • Easy setting “Rule 17” lighting, ditch, strobe and Mars lights

  • 2 accessory functions (ACC1 & ACC2), at 0.1 amp rate

  • Supports advanced consisting, (CV19)

  • Supports programming on main

  • Compatible with NMRA DCC standard

  • Complies with the Part 15 of FCC

  • 26.5mm long x 15.0mm wide x 5.0mm high