PECO LECTRICS for Peco Setrack and Peco Streamline, all gauges
Rated at 16 volts with 2 amp (continuous) or 2.5 amps (momentary). Two per pack.
Single and Double Slips To use the Single and Double Slips extra switches are required. If the section in which the slip is installed is under the operation of one controller, the wiring should be undertaken as (4). Note that the slip is electrically isolated completely with an electrical feed to both outside running rails. Two Peco Turnout Motors (PL10) need to be fitted and a Twin Microswitch (PL-15) attached to each motor.