Home > DCC and Analogue Controllers + Decoders > DCC > Roco Digital Systems
Roco 10789 z21 Booster Adapter

Roco 10789 z21 Booster Adapter

Our Price: £34.95
Share on Facebook
The booster adapter is used to connect up to 15 boosters with CDE interfaces on the booster bus. To power the adapter, an X-Bus connection is provided. Status LEDs indicate the 12 V supply as well as an active CDE output stage. The adapter also has an overcurrent or short-circuit shutdown at the CDE output. The booster adapter can be used on the following control units or amplifiers: ¦ Digital amplifier (10764) ¦ multiCENTRALE Pro (10832) ¦ z21®start ¦ Z21® (10820, 10822) Intended use: If the performance of our booster should not be sufficient (eg large railways, lane 0-IIm), connect a strong CDE booster (eg Massod, Lenz, Tams) via CDE adapter to the booster bus of our control panels or amplifier. Contents: ¦ CDE adapter ¦ X-Bus cable ¦ Operating instructions